Features:
* Built in 650W high-efficiency power amplifier, integrated 8 power A + B independent dual-speaker loop zone output,
each zone has independent LED indicator, independent output control buttons and volume adjustment
* 4 audio balanced input interfaces for playing any audio source in the zones
* Local emergency PTT microphone input and emergency voice can be configured by PC software to be played
in specific zone
* Integrate independent MP3 playback module, support USB, SD card and FM tuner function.
* Automatically detect the working status of each zone loop (fault, normal)
* The 8-channel trigger input/output port can trigger the emergency voice preset by the PC software to the
specified zone or the corresponding external power source to the corresponding event warning.
* Support third-party emergency audio input (user-defined emergency audio source)
* Integrated independent EVAC/ALERT voice information player
* There are online interface for the remote paging microphone and fireman microphone.
* The connection between each paging station uses standard RJ- 45 network port and standard CAT-5 network cable.
* The voice transmission uses balanced transmission mode for long-distance transmission
* Controller online interface can be connected to the slave unit, it uses standard RJ-45 network port and standard
CAT-5 network cable
* 1 Channel TCP/IP communication interface, supports visual interface operation based on Window platform,
and the system status can be automatically synchronized
* Support DC24V battery backup power supply
* With power amplifier monitoring function
* Support PTT recording function, no external equipment required
* With System fault output, emergency dry contact output and dry contact reset input for emergency status
* The zone output has three-wire and four-wire over-ridding adjustment function
* With IP address reset function and impedance calibration function
* The master-slave unit is integrated, and the device can be used as a controller or a slave unit by setting DIP address,
and the maximum of 19 slaves can be simultaneously online.
* The system can extend the number of the zones by slave units, it support 160 zones maximum
Specifications:
Model |
VA-8650WM |
Voltage |
~ 220V±20%, 50/60Hz |
Fuse specifications |
10A slow breaking type |
MIC input |
|
Sensitivity |
±2.5mV |
Frequency response |
200Hz~10KHz |
Input impedance |
1KΩ |
Signal to noise ratio |
>65dB |
Balanced line input |
|
Sensitivity |
±385mV |
Frequency response |
80Hz~16KHz |
Input impedance |
10KΩ |
Signal to noise ratio |
>70dB |
RS485 interface |
Slave RS485 interface |
|
Supports the highest baud rate of 38400bps |
|
Support up to 19 expansion machines |
CAN interface |
Remote MIC console CAN interface |
|
Baud rate 50Kbps |
|
Supports up to 28 remote Microphone and 4 Fireman Remote Microphone |
Trigger mode |
short circuit trigger and level trigger |
Output mode |
relay short circuit output |
Size (L×W×H) |
835*550*290mm |
Net weight |
23Kg |
Installation |
Wall Mounted |
Color |
Fireman's Red |
Operating temperature |
+5℃~ +40℃ |
Storage temperature |
-20℃~ +70℃ |